Energy Saving - Fuel Saving
The science behind the Enermosity Energy Saving, electricity saving and Fuel Saving device
Save 20% on Your Electricity Bill with Enermosity
Increase gas mileage by up to 30% with Enermosity
Water Treatment with Enermosity
Installation Instructions for Enermosity
Frequently Asked Questions about Enermosity
About the Enermosity energy saving, electricity savings and gas mileage MPG increase
Go Green Save Energy, Lower emissions with Enermiser
Testimonials - Great Results from Enermosity
Enermosity Customer Service
Track Your Energy Saving results

Enermosity for Home and Commercial Energy Savings

Text Box:  Enermosity magnets are easily installed on the circuit breaker box that delivers electricity into your home or business. The magnets also reduce energy costs for equipment fueled by natural gas, fuel oil, kerosene, butane and propane. Just surround the rubber or metal hose leading to the equipment with the Enermosity. Watch your energy bill shrink.

Electricity Application

“I put the magnets on the circuit box for my home, and my electricity usage dropped so much that the electric company showed up at my house to make sure the meter was still working right!” – Mario H.

  • Enermosity magnets are installed on your electrical panel as easily as sticking a magnet on a metal surface.

  • They are maintenance free, and do not require any energy source to operate. No electrician is required for installation, but you can be shocked if you go near any wiring.

  • The stainless steel outer shell and magnets inside the unit will not deteriorate. They last a lifetime.

Electricity Savings - Energy Saving Enermosity

Electric Bill Savings Example

Interested in seeing the effect of Enermosity just days after you place them on your electrical panel? Here’s what you do. Check last month’s electric bill. Find the total kilowatt hours used during the month. Divide that by the number of days in that month. This gives you a daily average usage rate.

The day after you install your Enermosity magnets, do a meter reading (click here for how to read your meter.). Read the meter again about one week later (or daily, if you’d like). Divide the total of all the readings by the number of readings. That’s your average daily usage with the Enermosity magnets installed.

Take last month’s average daily usage and subtract the average daily usage from your test. That’s the average daily amount of electricity that Enermosity is saving you.*

To get your cost savings, take that average savings and divide it by last month's average. That’s your percent savings. Multiply THAT by last month’s bill and that’s the money you’ll save!

Example:
Last month’s kilowatt hour daily average: 56 kWH
Test period average usage: 44.3 kWH

56.0 – 44.3 = 11.7       11.7/44.3 = 20.8% of immediate savings!

*Of course, your total amount of money saved will vary with the total amount of energy you use.

Click here for our form for tracking your own results!

Do you have expensive systems run by electricity in and around your home? Are these “nice to haves” quickly become too expensive to enjoy? Amenities like a pool or spa, outdoor lighting and irrigation systems, shouldn’t be unaffordable because of the price of energy. Enermosity can make these systems cost you much less and save energy, so you don’t have to give them up.

Run all of these more efficiently! Efficiency = SAVING MONEY!

More Power to the People!

For those fuel burning systems like natural gas, propane and oil furnaces, Enermosity cleans up the emissions moving through systems. This means the combustion area of the furnace will last longer as well as operate with more efficiency.

Enermosity takes 10 minutes to install on most fuel lines. You can see an immediate improvement in fuel economy. Isn’t spending the time it takes to make lunch worth a LIFETIME of savings?

Track your energy savings from your monthly fuel bills and watch your costs go down.

Actual Customer Results

An Amish restaurant in Indiana used one Enermosity unit on each of their four electrical panels. In one month their electric bill dropped from $1,800 a month to $1,500 a month.

"Despite the coldest winter in 10 years, the Chop Shop in Greensburg, Indiana has had three straight months of lower electric bills."

"My natural gas bill went down by 20%" - Lennie L.

For a more technical explanation of how Enermosity magnets work,
see our “Science of Enermosity” page.

Yes! Enermosity magnets are made and packaged only in the U.S.A.!

We support small businesses by producing our products in a small plant in Tennessee. Enermosity magnets are packaged in a home for the disabled. We keep our distributors and wholesalers to locally-owned businesses. You will not find our Enermosity magnets in the large chain stores!

To good to be true, you say? Try it risk-free for 60 days. If you don’t see terrific results, return your Enermosity magnets for a full refund. The only question we’ll ask is “Did you see reduced energy consumption?”. Tell us your story, so we can work harder to make sure Enermocity thrills all our customers, all the time.

 

60 day, 100% money back guarantee
You have nothing to lose and lots of money to save!
Order Now!

Made in the U.S.A

Patent Pending

UMiserU
520-303-0987
Email: sales@enermosity.com